WELCOME~Guangdong Xintao Technology Co.,Ltd.

✉info@xintaokeji.com

📱+86-13533289052

Your location: HOME > PRODUCTS > Molecular Sieve

13X APG Molecular sieve

Guangdong Xintao 13X APG molecular sieve is specially designed to co-absorb CO2?and H2O for air cryo-separation industry. It has larger capacity and faster adsorption speed for removal of CO2?and H2O to prevent the bed gelation, it is suitable for any air cryo-separation plants of any size and any types in the world.?

Model13X APG
ColorLight gray
Nominal pore diameter10 angstroms
ShapeSphere
Pellet
Diameter (mm) 1.7-2.5 (8*12mesh)3.0-5.0 (4*8 mesh)1.6 (1/16 inch)3.2 (1/8 inch)
Size ratio up to grade (%) ≥98≥98≥98≥98
Bulk density (g/ml)≥0.67≥0.65≥0.63≥0.62
Wear ratio (%)≤0.20≤0.20≤0.40≤0.40
Crushing strength (N)≥25/piece≥75/piece≥25/piece≥60/piece
Static H2O adsorption (%)≥27≥27≥27≥27
Static CO2 adsorption (%)≥18≥18≥18≥18
Water content (%)≤1.5≤1.5≤1.5≤1.5
Typical Chemical FormulaNa2O . Al2O3 . 2.45SIO2 . 6.0H2O (SiO2 : Al2O3 ≈2.6-3.0)
Typical ApplicationRemoval of CO2 and H2O for air cryo-separation application
Warranty

a)By National Standard HG-T_2690-2012

b)Offer lifetime consultation on problems occurred

Regeneration:

Guangdong Xintao Molecular Sieve Type 13X APG can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.

To remove moisture from a 13X APG molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2 levels below 2ppm.

The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process

Size:

13X APG- Zeolite are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.

Attention:  

To avoid damp and pre-adsorption of organic before running, or must to be reactivated.     

Online enquiry